|
l
Power supply: 3 standard AA alkaline
batteries.
l
Battery
life: About one year in normal
state.
l
Function card£ºMother Card and Child Card. The Mother
Card is used to create Child Card. The Child Card is the key
of the lock.
The same RFcard can be shared by all
the locks.
I.
Create Mother Card: Connect the power line to
the IC, press the ¡°Reset Button¡± at the back, after a ¡®tick¡¯,
touch the RF Card which you want to become Mother Card lightly
to the hole of lock, after a long ¡®tick¡¯ and a short ¡®tick¡¯,
the RF card is recognized as Mother Card by the lock. Each
lock can have one Mother Card at the most; the last one
replaces the prior one.
II.
Create Child Card (the capacity is 15
for each lock)
1.
Create Guest Card: touch the Mother Card
lightly to the hole of lock, after a ¡®tick¡¯ and the LED
flashes in green, the lock is unlocked, touch the Mother Card
lightly to the hole of lock again, after a ¡®tick¡¯ and the LED
flashes in green, touch the RF card which you want to become
Guest Card lightly to the hole of lock, after a ¡®tick¡¯ the RF
card is recognized as Guest Card by the lock. (You can
continue to touch the other RF Cards before the LED stops
flashing. After 8 seconds you touch the last card, the LED
stops flashing)
2.
Terminate Child
Card
1)
Terminate one Child
Card: Touch the
Mother Card lightly to the hole of lock for 2 times
successively, the LED flashes in green, touch the Child Card
which you want to delete from the lock lightly to the hole of
lock, after 2 short ¡®tick¡¯ the Child Card¡¯s information is
deleted from the lock.
2)
Terminate all Child
Cards: Touch the Mother Card
lightly to the hole of lock for 3 times successively, the LED
flashes in green, after 3 short ¡®tick¡¯ all of the Child Cards¡¯
information is deleted from the
lock.
III.
Unlock the
lock:
Touch the Mother Card or
Child Card lightly to the hole of lock, after a ¡®tick¡¯
and the LED flashes in green, then the lock unlock, and after
a while the lock locks automatically. If you want the
lock unlocked always, you should turn the ¡°Option Switch¡± to
the end; touch the card again to lock the
lock.
IV.
Sign of failed
operation:
LED flashes in red and 3 short
¡®tick¡¯.
V.
Low voltage warning: If the batteries¡¯ voltage
is low, when touch RF Card that will be a long successive
¡®tick¡¯ from the buzzer. | 
